|
Post by account_disabled on Mar 6, 2024 9:32:17 GMT
The interface is designed for mechanical drives, which are slower compared to drives and therefore have relatively low physical limits on the amount of data that can be transferred at one time. It uses a communication protocol that is also specifically optimized for much slower speeds. Interfaces work similarly to interfaces.and more reliable, and is mainly installed in servers and disk arrays, allowing disks to be connected to two controllers at the same time. On the other hand, the ( ) communication USA Phone Number List protocol was developed directly for modern disks, allowing you to take advantage of their high read and write speeds. The disk is connected directly to it via a line, so the entire data transfer process is much faster than the interface, with almost zero latency. There is no fundamental difference with the price of the drive. By the way, we recently tested the performance difference. You can see the results in our test and article. How big is the gap between them? Its format also depends on how the disks are connected: Traditional formats with platter drives, where the drives are connected via buses Modern formats, where the disks are smaller in size, they can be connected via interfaces as well as buses via communication protocols. The slot is located directly on the motherboard, no cables are required.
|
|